Barbour Countrywear Collection
Men's Barbour Warm Pile Snap-in Lining
Product Code: 000864 / MLI0003
£59.95
- Description+
-
Barbour Men's Warm Pile Lining is the original Barbour 'interactive' lining. A proven companion to the original Barbour range. Acrylic pile for insulation and light weight, this 'A55' has an overlock finish and is studded for attachment inside the Barbour International jacket (000326 or old code A7) and other International jackets.
For information on jacket compatibility please navigate to the jacket you require a hood and/ or liner for, select your size and colour, go to the hood and liner tab beneath and this will show the correct match.
We recommend that you order the liner in the same size as your jacket. - Features +
-
- Stud-in acrylic lining
- Sleeveless
- Overlock finish
- No internal pockets
- Studded for attachment to inside of coat
- To Fit: A7 (Product Code 000326)
- Length: 34-52ins | 86-132cm
- Product measurements +
-
How to measure
Size Back Length (CM) Chest (CM) 30 - - 32 - - 34 66.7 112 36 69.2 117 38 70.5 122 40 70.5 127 42 71.1 132 44 71.1 137 46 71.1 142 48 71.1 147 50 71.1 152 52 71.1 157
Please note these measurements are based on the actual product, please allow room for additional layers if required. - Recommended accessories+
-
Select the product size and colour (above) to view currently accessories.
- Care+
- 40° C Delicate Wash
- Do Not Bleach
- Do Not Iron
- Professional Dry Clean
- Do Not Tumble Dry
- Delivery & Returns +
Rated 1 out of
5
by
Stu84 from
Nice fit but very poor build and quality control.
I bought this liner to fit in to my Barbour jacket and whilst it is as warm as expected, three of the snap studs which attach it to the inside of the jacket detached from the liner within a few days of wearing it and the bottom two where slightly out of alignment so overall I'm disappointed with the item.
Date published: 2019-03-29
Hello. Does this liner fit into a Barbour international jacket?
Yes it fits. But the securing poppers keep coming unfastened from the fleese.
Date published: 2019-10-28
Hi, I have a woman beadnell wax jacket (size 36) and I would like add a warm liner. I chose this one but I don't know if fits 36 or 34 fits better. Fit both for that jacket or 34 could be too tight? Best regards
Thank you for your question and interest in our products.
The Warm Pile Snap-in liner is not compatible with the Beadnell jacket which takes a zip-in liner only.
We do a zip-in version of the warm pile liner (product code:000868) which we would recommend you select in the size 32 to fit inside your Beadnell.
Alternatively we also offer the Fleece Betty Interactive Liner (product code:025881) which we would advise you select in the same size as your jacket.
Please do not hesitate to contact us directly if we can be of any further assistance.
Date published: 2019-05-30
